Search
Now showing items 41-50 of 264
Estudos qualitativos das transformações termodinâmicas ocorridas durante o processo pirometalúrgico de recuperação de Pb a partir de PbSO4
(Universidade Federal de São Carlos, 2013-08-01)
This study was carried out in order to gain a qualitative understanding of one of the fundamental processes of pyrometallurgical recovery of Pbfrom the inorganic scraps of lead-acid batteries by the reduction of PbSO4to ...
Avaliação da cinética de degradação abiótica do polietileno de alta densidade, na presença e ausência de aditivo pró-degradante e estabilizantes
(Universidade Federal de São Carlos, 2016-11-28)
The convenience of single-use packaging of high density polyethylene (HDPE) led to the need to convert them into biodegradable materials in less time to minimize the environmental problems caused by disposal. An alternative ...
Síntese de cerâmicas tipo perovskita com potencial uso em células solares
(Universidade Federal de São Carlos, 2017-03-07)
Visible light accounts for the biggest fraction of the solar irradiance. One of the strategies for achieving higher photovoltaic power conversion efficiency is the application of low band-gap materials (Eg ideal≈1.4 eV) ...
Fabricação de amostras maciças da liga Fe-Co-B-Si-Nb com estrutura amorfa pela rota de atomização e extrusão a quente
(Universidade Federal de São Carlos, 2018-08-23)
Metallic glasses alloys are a relatively new class of materials characterized by the absence of structural long-range order. During heating, these alloys exhibit a glass transition at a temperature (Tg) before reaching the ...
Desenvolvimento do aço inoxidável supermartensítico resistente ao desgaste por conformação por spray para aplicação em "risers"
(Universidade Federal de São Carlos, 2013-04-24)
The oil exploitation and production in the pre-salt layers in safe, efficient and economically viable way depend on the development of materials that bear the severe conditions found in their applications during their whole ...
Desenvolvimento de Nanoblendas PLA/EVOH biodegradáveis com características de barreira a gases e vapores
(Universidade Federal de São Carlos, 2018-07-20)
Poly (lactic acid) (PLA) is a non-toxic, transparent and biodegradable aliphatic polyester, produced from renewable raw materials. This polymer meets several requirements for packaging applications, but is fragile and has ...
Blendas de PHBV e PCL para uso em dispositivos de osteossíntese
(Universidade Federal de São Carlos, 2010-12-15)
This study aimed to develop and characterize polymer blends using biodegradable and bioabsorbable polymers poly (hydroxybutyrate-co-valerate) PHBV with 12% valerate, and poly (ε-caprolactone) PCL, in order to make ...
Correlações entre microestrutura, parâmetros térmicos e propriedades mecânicas de ligas de alumínio da série 5xxx solidificadas unidirecionalmente
(Universidade Federal de São Carlos, 2017-08-04)
Processing high-Mg content Aluminum Alloys by continuous casting technics is considered an industry challenge. The present research aims to characterize 5xxx alloy series, considering composition based on the commercial ...
Microestrutura e propriedades mecânicas da liga AA6061 processada por deformação plástica severa em temperatura criogênica
(Universidade Federal de São Carlos, 2017-08-08)
The present work aimed two fronts: to characterize the mechanical behavior of the AA6061 alloy at cryogenic temperature, and to study the microstructural and properties evolution after cryogenic severe plastic deformation. ...
Estudo da resistência à corrosão de ligas de alumínio com grãos ultrafinos obtidos por deformação plástica severa através do processo ECAP
(Universidade Federal de São Carlos, 2017-10-02)
The present work evaluated the effect of severe plastic deformation and ultrafine grains, obtained through the ECAP (equal-channel angular pressing) process, in the corrosion resistance of AA1050 aluminum alloy. The ...