Search
Now showing items 1-10 of 30
Produção e caracterização de recobrimentos de aço, empregando a liga amorfizável Fe-Cr-Nb-B
(Universidade Federal de São Carlos, 2012-02-13)
The equipments used to oil flow are submitted in an aggressive environment with the presence of hydrogen sulphide, carbon dioxide and sand, which contribute to corrosion and wear of the surface. To resist of these requests ...
Estudo da cinética de oxidação em altas temperaturas da liga SV15 aplicada na fabricação de sedes de válvulas de escape de motores automotivos
(Universidade Federal de São Carlos, 2014-04-14)
The SV15 alloy is applied in the production of the exhaust valve seats of automotive engines. The conditions of service in which the part is submitted require materials resistant to oxidation because of high temperature ...
Caracterização microestrutural e mecânica da liga de Al AA7050 reciclada por conformação por spray e extrusão
(Universidade Federal de São Carlos, 2013-01-22)
Aluminium alloys of the 7000 series are widely used in structural components in the aircraft industries due to their high strength and low density. However, a large amount of scraps is generated by the machining of the ...
Concretos refratários aluminosos espinelizados
(Universidade Federal de São Carlos, 2008-04-10)
The increasing steelmaking production level in association with the steel quality requirements led to the use of high performance materials. In this context, the use of refractory castables increased, due to their production ...
Comportamento térmico e mecânico de resinas termocuráveis para aplicação como revestimento adesivo em fios esmaltados
(Universidade Federal de São Carlos, 2010-04-01)
Selfbonding magnet wires are composed by two or more polymeric cover layers, being the inner layers thermosetting and the over coat composed of a thermoplastic cross-linkable layer. These wires are used in several magnetic ...
Avaliação de um critério de equivalência entre dados de tração a quente e fluência em aços
(Universidade Federal de São Carlos, 2007-05-28)
This work was conducted in four stages, the first to understand the phenomena that affect the 2.25Cr-1Mo steel hot tensile in different conditions, observing their behavior in a wide range of temperature and strain rates, ...
Produção de recobrimentos metálicos a partir de ligas de ferro amorfizáveis
(Universidade Federal de São Carlos, 2011-10-23)
The aim of this work was to study the production of metal coatings from amorphous alloy Fe-25Cr-7Ni-4,5B (wt.%), with special focus on mechanical and microstructure properties. Initially, preliminary studies were made ...
Obtenção de estruturas porosas altamente bioativas via sinterização do Biosilicato®
(Universidade Federal de São Carlos, 2009-04-07)
In the present work, scaffolds were obtained through the controlled sintering of Biosilicate®. This material possesses good mechanical properties and its bioactivity level is comparable to that of bioglasses, making it an ...
Condutividade elétrica da solução sólida céria-zircônia dopada com ítrio e gadolínio
(Universidade Federal de São Carlos, 2009-09-10)
Rare earth doped ceria has a great potential to be used as electrolyte in temperatures around 800 °C in fuel cells due to its higher electrical conductivity than YSZ. However, the reduction of Ce+4 to Ce+3 in low oxygen ...
Situação atual e perspectivas de utilização de materiais no interior de aeronaves executivas
(Universidade Federal de São Carlos, 2009-08-04)
This study focuses on analyzing the current situation and perspectives of materials selection and utilization, like composites, decorative laminates and films, and others, in business aircraft, particularly in furnishings ...