Search
Now showing items 1-8 of 8
Estudo comparativo entre as tecnologias via úmida e via seca para a preparação de massas de porcelanatos
(Universidade Federal de São Carlos, 2011-09-20)
Considering the growth of the Brazilian ceramic tiles sector and its expressivity in the global setting, the present work has been developed in order to evaluate the main differences related to the preparation of bodies ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Comportamento em fadiga da liga Ti-6Al-4V para uso biomédico com superfícies modificadas
(Universidade Federal de São Carlos, 2011-09-09)
Surface modification in implants is used, basically, to improve osseointegration, which is defined as the intimate contact between bone and implant material, without a soft tissue layer in the bone/implant interface. ...
Influência das condições de eletrodeposição sobre a resistência a corrosão, susceptibilidade à fragilização por hidrogênio e à corrosão sob tensão do aço ABNT – 4340 revestido com liga Zn/Ni
(Universidade Federal de São Carlos, 2011-01-28)
Zinc-nickel alloys were electrodeposited on ABNT 4340 high strength steel in chloride acid media. The effect of the electrolyte composition and electroplating conditions on cathodic efficiency, chemical composition, ...
Influência da adição de um fundente sintético no mecanismo de coloração final de revestimentos cerâmicos
(Universidade Federal de São Carlos, 2011-08-12)
The presence of iron oxide in ceramic tile mass contributes to the reddish color firing of the products leading to a lower aggregate value, not to be regarded as a "noble" ceramic. However, the use of raw materials with ...
Novas ligas formadoras de fase amorfa do sistema Ni-Nb-Zr e seu comportamento mecânico
(Universidade Federal de São Carlos, 2011-04-15)
Ni-based amorphizable alloys in the bulk form show a good combination of properties, with high mechanical strength and hardness, good ductility and excellent corrosion resistance. These alloys have been used in recent ...
Caracterização da resistência à corrosão de ligas inoxidáveis Fe-Mn-Si-Cr-Ni-(Co) com efeito de memória de forma
(Universidade Federal de São Carlos, 2011-03-03)
In this work, the corrosion behavior of three Fe-Mn-Si-Cr-Ni (Co) shape memory stainless steels (SMSS) in aggressive environments was characterized. The electrochemical corrosion behavior in 0.5 M H2SO4 solution was obtained ...
Deformação da fase dispersa e degradação de blendas poliméricas em extrusora dupla-rosca aberta e fechada
(Universidade Federal de São Carlos, 2011-09-05)
In order to obtain flexibility of the processing in a twin-screw extruder and operate it as an internal mixer, the second phase dispersion and deformation and degradation were analyzed during processing in an open and ...