Buscar
Mostrando ítems 251-260 de 270
Efeito da re-nitretação nas propriedades de matrizes de extrusão a quente de alumínio, confeccionadas em aços ferramenta vex e h13
(Universidade Federal de São Carlos, 2018-07-08)
Aluminum extrusion is a thermomechanical process widely used throughout the world, and the performance of this process is strongly dependent on the quality of the tool steel used in the manufacture of the dies. In this ...
Indicadores de produção científica para prospecção tecnológica em manufatura aditiva de biocerâmicas
(Universidade Federal de São Carlos, 2019-05-31)
In the Bone Tissue Engineering, biomaterials are used as scaffolds to produce a support and cell growing. Because of the similarity to the bones cells, ceramic compounds are the main materials used to produce the scaffold. ...
Amorfização e cristalização da liga fe68cr8mo4nb4b16: caracterização através de técnicas avançadas de microscopia eletrônica
(Universidade Federal de São Carlos, 2019-08-05)
Stainless steels of the different classes can have their composition modified through the addition of boron, aiming to obtain both amorphous phases and the controlled formation of borides. The formation of amorphous phase ...
Degradação em processamento, cinética de cristalização e policondensação no estado sólido de poli(ácido láctico)
(Universidade Federal de São Carlos, 2018-08-31)
In this work, the degradation of poly (lactic acid) (PLA) within conditions
of high temperature, shear stress and humidity was studied. In addition to that,
the crystallization kinetics of these degraded materials was ...
Desenvolvimento de compósitos biodegradáveis a partir de amido termoplástico e fibras vegetais
(Universidade Federal de São Carlos, 2011-09-16)
This project had as main objectives to obtain and to develop new and biodegradable composites from renewable sources using a thermoplastic starch (TPS) matrix reinforced with different amounts of natural fibers, acuri, ...
Controle da hidratação do óxido de magnésio: fundamentos físico-químicos e aplicação tecnológica
(Universidade Federal de São Carlos, 2016-08-24)
Magnesium oxide has been proposed as an alternative binder to calcium aluminate cement in refractory castables with reduced amount of CaO. The binding effect is generated by the MgO hydration, resulting in brucite [Mg(OH)2]. ...
Desenvolvimento de manta flexível altamente bioativa
(Universidade Federal de São Carlos, 2011-07-29)
Recently, intensive studies have been conducted with biomaterials aiming their application as synthetic grafts for reparation and maintenance of bones, teeth and cartilage tissues that have been damaged or lost due to ...
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Regeneração de rejeito espuma de SBR através de extrusão no estado sólido e incorporação em SBR virgem
(Universidade Federal de São Carlos, 2017-09-29)
The objective of the present work is the study of the recycling of vulcanized rubber foam waste from the footwear industry through the solid state extrusion process known as Solid State Shear Extrusion (SSSE). The industrial ...