Search
Now showing items 241-250 of 270
Indicadores do patenteamento de materiais armazenadores de hidrogênio voltados para o monitoramento tecnológico
(Universidade Federal de São Carlos, 2016-05-13)
Hydrogen is considered the energy carrier of the future, due to its high energy content and the possibility of its sustainable production. However, its broader implementation depends on overcoming of several technological ...
Estudo da microestrutura e resistência à corrosão de ligas binárias Ni-Nb solidificadas rapidamente
(Universidade Federal de São Carlos, 2018-02-26)
The The aim of this work is to study the microstructure and corrosion resistance of rapidly solidified binary Ni-xNb alloys (x= 10, 20, 30, 40, 45, 52 e 57 wt%), additionally the microstructure of the Ni-52Nb alloy, prepared ...
Análise térmica e energética do revestimento refratário de panelas de aço via modelos computacionais
(Universidade Federal de São Carlos, 2018-07-30)
The secondary metallurgy is an energy-intensive step in the steelmaking process that requires an accurate adjustment of the composition and temperature of the molten metal during the ladle refining. In this context, the ...
Otimização do processo de soldagem por fricção por ponto (FSpW) de soldas de materiais similares e dissimilares de ligas leves
(Universidade Federal de São Carlos, 2014-08-07)
Currently there is a lot of pressure in the aeronautical and automobilistic transport section in order to reduce the fuel consumption and consequently cost and gas emissions. This measure has increased in the last years ...
Filmes de nanocristais e nanofibrilas de celulose de eucalipto e abacaxi (curauá) por continous casting
(Universidade Federal de São Carlos, 2017-02-24)
New materials from cellulose have been developed, such as cellulose
nanocrystals (CNC) and cellulose nanofibrils (CNF). Different morphologies of
the cellulose can lead to the formation of films with different ...
Caracterização do efeito da rugosidade em filmes finos de TiNb sobre o aço 316L para aplicação na biomedicina
(Universidade Federal de São Carlos, 2017-03-10)
With the increase in life expectancy, there has been a raise in the use of prostheses due to the need to replace parts of the human body. To avoid tissue rejection, metal alloys from implants should be biocompatible. The ...
Soldagem por fricção e mistura da liga de alumínio AA2198-T851 em chapas de diferentes espessuras
(Universidade Federal de São Carlos, 2012-12-11)
Friction Stir Welding (FSW) process, conceived in 1991, has been the target of research in the last decades due to the excellent properties presented by its welded joints, favored by the fact of occurrence in the solid ...
Desenvolvimento de compósitos híbridos de epóxi/nanotubos de carbono/cargas minerais e avaliação das propriedades elétricas e termomecânicas: efeito da viscosidade e do solvente
(Universidade Federal de São Carlos, 2018-09-17)
In this research project, epoxy/carbon nanotubes/mineral fillers hybrid nanocomposites were produced using a high energy sonication process. Moreover, two epoxy resins based on DGEBA with different viscosities were used, ...
Avaliação do comportamento reológico, térmico e mecânico de misturas de PBAT com elevados teores de lignina
(Universidade Federal de São Carlos, 2019-12-17)
The massive accumulation of plastic waste and its environmental impact is in great evidence today. Each year, more than 8 million tons end up in the oceans, so research indicates that there will be more plastics than fishs ...
Análise sistêmica das massas de tamponamento para altos-fornos
(Universidade Federal de São Carlos, 2010-05-05)
The increase in the world steel production mainly observed in the last decade demanded a significant growth in the hot metal production through the blast furnace process. A key point in blast furnaces operation is related ...