Buscar
Itens para a visualização no momento 21-30 of 30
Efeito dos materiais do backing bar na geometria e dureza de juntas soldadas por FSW em ligas de alumínio 6013 e 2024
(Universidade Federal de São Carlos, 2009-08-12)
Solid-state joining techniques such as Friction Stir Welding (FSW) are a natural choice to produce weld low heat input, limited slight distortion and low microstructural and mechanical degradation. Great effort has currently ...
Sílica coloidal como agente ligante e fonte mulitizadora em concretos refratários
(Universidade Federal de São Carlos, 2009-03-03)
The recent development of refractory castables for high temperatures applications are closely related to binders technology, especially those presenting superior performance and installation properties. The calcium aluminate ...
Estudo da dispersão de pigmentos orgânicos em resina de polipropileno para aplicação em fibras e filamentos
(Universidade Federal de São Carlos, 2009-08-03)
Polypropylene has become widely used in fiber and filament applications; most part of these applications use colorful pigments to satisfy aesthetic necessities, communication, identification and others. To achieve the ...
Processamento e caracterização de mantas de nanofibras eletrofiadas e orientadas de Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-11-10)
In this work was developed a collector to process aligned uniaxially nanofibers mats and with low dimensions suitable for applications such as sensor or transducer. Such nanofibers mats may have applications where control ...
Aluminato de lantânio puro e dopado: obtenção e caracterização elétrica
(Universidade Federal de São Carlos, 2009-02-20)
In the attempt to find new electrolyte materials for Solid Oxide Fuel Cells (SOFC) that works at low temperature, perovskite-type materials have been intensively investigated. These materials have favorable crystal structure ...
Estudo da influência da adição de serragem de couro tratada quimicamente nas características de argamassas de cimento Portland
(Universidade Federal de São Carlos, 2009-05-15)
The purpose of this study was to examine the major environmental concern for the large volume of toxic wastes generated by industries of tanneries and the search for a technological solution for the treatment of this waste. ...
Influência de defeitos nas propriedades mecânicas de juntas soldadas por FSW da liga AA6013-T6
(Universidade Federal de São Carlos, 2009-04-28)
In 1991, it was developed a solid state welding process called Friction Stir Welding - FSW, intended to increase the number of applications for the aluminum and its alloys. As every welding process the presence of defects ...
Aplicações de resíduo de bauxita e cinza pesada da indústria do alumínio na fabricação de cimento Portland
(Universidade Federal de São Carlos, 2009-02-20)
Presently, a sustainable development is considered fundamental for the success and competitivity company s. Believing in such, the major Brazilian aluminum manufactures have invested, over the last two years, more than U$S ...
Avaliação do grau de gelificação de formulações de PVC rígido utilizando o método de ultrassom
(Universidade Federal de São Carlos, 2009-09-10)
The determination of the gelation degree is an important tool for predicting the properties of final products made of rigid PVC compounds. Thus, it is evident the need of a quick and effective test method that can be applied ...
Efeito da porosidade sobre o manchamento de porcelanato polido
(Universidade Federal de São Carlos, 2009-12-15)
Porcelain tile is a type of ceramic tile which has shown the highest worldwide expansion in recent years due to the excellent technical and esthetic qualities of the product, which have augmented the possibilities of its ...