Buscar
Mostrando ítems 91-100 de 425
Simulação numérica de laminação da liga para implantes cirúrgicos ASTM F138
(Universidade Federal de São Carlos, 2010-02-26)
The hot rolling process is a kind of industrial method used in raw material manufacturing for surgical implant pieces. The hot rolling processing has been the subject of many studies and the knowledge of this process is ...
Processamento e caracterização de ligas amorfizáveis TiCuNiZr e TiFeCoZr
(Universidade Federal de São Carlos, 2010-03-31)
Searching the development of bulk metallic glasses the research takes two directions, the development of alloys with a high glass forming ability and development of new processes or improving existing processes. In this ...
Reatividade de materiais de moldagem na fundição de precisão de titânio
(Universidade Federal de São Carlos, 2009-04-13)
Investment casting of Titanium parts free of defects is very difficult owing to the reactivity of this element in the liquid state .The objective of this study was to evaluate the reactivity of titanium with refractory ...
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Avaliação eletroquímica de juntas soldadas por fricção radial de aços inoxidáveis supermartensíticos
(Universidade Federal de São Carlos, 2007-03-23)
Supermartensitic stainless steels are used in the oil and gas industry to the construction of line pipes which require welding operations. This process affects the corrosion resistance of the welded joint. Recently, new ...
Produção de recobrimentos metálicos a partir de ligas de ferro amorfizáveis
(Universidade Federal de São Carlos, 2011-10-23)
The aim of this work was to study the production of metal coatings from amorphous alloy Fe-25Cr-7Ni-4,5B (wt.%), with special focus on mechanical and microstructure properties. Initially, preliminary studies were made ...
Avaliação do dano por choque térmico em concretos refratários via espectroscopia acústica ressonante não-linear
(Universidade Federal de São Carlos, 2012-03-02)
In this thesis the Non-linear Resonant Acoustic Spectroscopy Technique used to evaluate the mesoscopic non-linearity was incorporated into the Impulse Excitation Technique, which is extensively applied to the evaluation ...
Estudo das propriedades reológicas de nanocompósitos para a produção de filmes tubulares
(Universidade Federal de São Carlos, 2008-07-08)
In this work, the use of rheological measurements in substitution or complementation to methods normally employed in the characterization of nanocomposites, such as X-ray diffraction (WAXS) and transmission electron ...
Análise da processabilidade de blendas PBT/ABS compatibilizadas in situ com copolímeros acrílicos
(Universidade Federal de São Carlos, 2007-12-14)
Poly(butylene terephthalate)/acrylonitrile-butadiene-styrene (PBT/ABS) blends show high toughness at room temperature, low ductile-brittle transition temperature and stable morphology when compatibilized. The flowability ...
Obtenção de estruturas porosas altamente bioativas via sinterização do Biosilicato®
(Universidade Federal de São Carlos, 2009-04-07)
In the present work, scaffolds were obtained through the controlled sintering of Biosilicate®. This material possesses good mechanical properties and its bioactivity level is comparable to that of bioglasses, making it an ...