Buscar
Itens para a visualização no momento 141-150 of 426
Seleção de ligas com alta tendência de formação de estrutura amorfa
(Universidade Federal de São Carlos, 2007-03-08)
The understanding of the law that explain why certain alloys form amorphous
structure by cooling the molten melt under cooling rates lower than others alloys
remains as one of the great challenges of the materials science ...
Análise de falha de martelos oscilantes de desfibradores utilizados em usinas sucroalcooleiras
(Universidade Federal de São Carlos, 2021-07-30)
Sugarcane mills have demanded more control of their production line,
reduced loss of raw material, and a longer period before maintenance of their
equipment, aiming to increase their profitability. The main station of ...
Síntese de Mg2NiH4 para armazenagem de hidrogênio em compósito polimérico
(Universidade Federal de São Carlos, 2021-03-01)
In this work, powder production routes based on Mg2NiH4 are investigated, utilizing high-energy reactive milling; thermal treatment procedures, and hydrogen absorption/desorption cycles, which promote controlled decrepitation, ...
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Recobrimentos de ligas Ti-Nb-Zr depositados por pulverização magneto-catódica sobre aço inoxidável AISI 316L para aplicações biomédicas
(Universidade Federal de São Carlos, 2022-11-30)
The work consists of the deposition of Ti-Nb-Zr ternary alloy coatings in the form of thin films on an AISI 316L stainless steel substrate for applications in the biomedical area, such as dental or orthopedic prosthesis. ...
Desenvolvimento, caracterização e desempenho de novos eletrodos para dispositivos eletromecânicos baseados em nanocompósitos elastoméricos condutores tratados por plasma
(Universidade Federal de São Carlos, 2022-06-28)
Ionomeric polymer-metal composites (IPMC) are devices generally composed of metallic electrodes and an ionomeric polymer membrane in a “sandwich-like” format, whose main property is the electromechanical actuation or sensing ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...
Estudos qualitativos das transformações termodinâmicas ocorridas durante o processo pirometalúrgico de recuperação de Pb a partir de PbSO4
(Universidade Federal de São Carlos, 2013-08-01)
This study was carried out in order to gain a qualitative understanding of one of the fundamental processes of pyrometallurgical recovery of Pbfrom the inorganic scraps of lead-acid batteries by the reduction of PbSO4to ...
Abordagem termodinâmica do transporte iônico e da relaxação estrutural em vidros fosfatos de prata
(Universidade Federal de São Carlos, 2016-09-12)
Ionic conductivity in glasses was first discovered and demonstrated by
Warburg in 1884, but although it has been studied for over a century, the
mechanisms underlying ionic conduction in glasses are not yet entirely ...