Buscar
Mostrando ítems 101-110 de 130
Avaliação da resistência mecânica de argamassas de cimento Portland contendo serragem de couro tratada em meio ácido
(Universidade Federal de São Carlos, 2006-07-31)
Suitable destination of industrial solid wastes that have not well
established or completely successful mitigation techniques is nowadays a
fundamental important subject, all over the world. In Brazil, one of the ...
Aluminato de lantânio puro e dopado: obtenção e caracterização elétrica
(Universidade Federal de São Carlos, 2009-02-20)
In the attempt to find new electrolyte materials for Solid Oxide Fuel Cells (SOFC) that works at low temperature, perovskite-type materials have been intensively investigated. These materials have favorable crystal structure ...
Caracterização do nanocompósito de Al2O3 com inclusões nanométricas de ZrO2 visando sua aplicação como reforço em próteses odontológicas de cerâmica livre de metal
(Universidade Federal de São Carlos, 2008-02-22)
There are many different materials used in dental prosthesis, metal combined with ceramic (metalloceramic), combination of polymers with metal (metal-polymer), metal, polymer and ceramic metal free or metal-free. Metalfree ...
Estudo da influência da adição de serragem de couro tratada quimicamente nas características de argamassas de cimento Portland
(Universidade Federal de São Carlos, 2009-05-15)
The purpose of this study was to examine the major environmental concern for the large volume of toxic wastes generated by industries of tanneries and the search for a technological solution for the treatment of this waste. ...
Seleção de ligas com alta tendência de formação de estrutura amorfa
(Universidade Federal de São Carlos, 2007-03-08)
The understanding of the law that explain why certain alloys form amorphous
structure by cooling the molten melt under cooling rates lower than others alloys
remains as one of the great challenges of the materials science ...
Modificação microestrutural da liga Al-Si 380 conformada por spray com a co-injeção de partículas contendo fases intermetálicas
(Universidade Federal de São Carlos, 2007-12-19)
The aim of this work was to determine the microstructure and the mechanical properties of a spray formed Al-Si 380 alloy in different conditions as follow: co-injection of particles containing intermetallic phases, extrusion ...
Desenvolvimento de blendas poliméricas PVC/NBR através de processamento reativo e vulcanização dinâmica in situ
(Universidade Federal de São Carlos, 2008-02-28)
Dynamic vulcanization is a process of vulcanization of an elastomer during melt mixing with a thermoplastic which results in a material with better chemical and mechanical properties at high temperature. The PVC/NBR blends ...
Estudo do critério de Niyama na formação de porosidade em fundidos de aço com distintos intervalos de solidificação
(Universidade Federal de São Carlos, 2005-09-29)
This study concerns the analysis of the application of the Niyama Criteria as a tool to predict porosity formation on steel castings made from steel with different solidification gaps. Therefore, test coupons were project ...
Influência de defeitos nas propriedades mecânicas de juntas soldadas por FSW da liga AA6013-T6
(Universidade Federal de São Carlos, 2009-04-28)
In 1991, it was developed a solid state welding process called Friction Stir Welding - FSW, intended to increase the number of applications for the aluminum and its alloys. As every welding process the presence of defects ...
Aplicações de resíduo de bauxita e cinza pesada da indústria do alumínio na fabricação de cimento Portland
(Universidade Federal de São Carlos, 2009-02-20)
Presently, a sustainable development is considered fundamental for the success and competitivity company s. Believing in such, the major Brazilian aluminum manufactures have invested, over the last two years, more than U$S ...