Navegando TCC por título
Itens para a visualização no momento 72-91 of 96
-
Nano-CBD: sistemas nanoestruturados para liberação controlada de canabinoides
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 13/12/2022)Nanotechnology has enhanced in many fields of knowledge in the last decades, being materials engineering the basis for implementing nanostructures and upgrading of a long list of physicochemical properties of materials. ... -
Uma nova fronteira da revolução industrial 4.0: smart materials
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/04/2022)Throughout economic and productive development, we went through some revolutions that have changed the course of society and productive means. We are currently undergoing a fourth industrial revolution, which unites physical, ... -
Overview of Al-Si alloys for additive manufacturing and prospects
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/11/2021)Additive manufacturing (AM) has emerged in recent years for enabling the generation of parts with highly complex geometries. Due to the nature of the AM process, which causes alloys to experience a complex thermal history ... -
Panorama da reciclagem dos principais materiais metálicos no Brasil
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/06/2021)Currently, society demands high quantities of materials to produce the most varied products. This demand is a consequence of both the population growth promoted by technological advances and the change in the consumption ... -
Polímeros ionoméricos e sua aplicação em supercapacitores: potencialidades e limitações
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 25/08/2023)The following work addresses the importance of studying ionomeric polymers and supercapacitors. These polymers are materials that contain ions in their structure, providing unique and interesting properties such as high ... -
Potencial utilização de areia de fundição na construção civil: um estudo de caso para a cidade de São Carlos - SP
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 13/06/2023)The general objective of the research was to understand the importance of using foundry sand in civil construction. The specific objectives of this work were: to discuss environmental sustainability; explain the importance ... -
Potencialidades da manufatura aditiva
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 19/04/2022)Additive manufacturing is an important technology with a potential to innovate the production methods through its characteristics such as sustainability, possibility to print complex parts, customization of the product and ... -
Produção e caracterização de liga multicomponente duplex do sistema CrCoNi com composição Cr51,5Ni33,5Co15
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 06/12/2022)Multicomponent and/or high entropy alloys (HEAs) are a new class of materials that do not have a main element and are instead composed of concentrated solid solutions. Several compositions with interesting mechanical and ... -
Propriedades mecânicas e bioativas de PLA, PCL e suas blendas com HA impressas por FFF
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 16/11/2021)Bone repair measures involving surgeries and tissue replacements are increasingly present today, in addition to the progressive advancement of the market for prostheses, implants and technologies that invest in the health ... -
Prospecção tecnológica do setor de embalagens poliméricas antimicrobianas para alimentos
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 20/03/2023)The food packaging sector is currently challenged to reduce food waste and the potential risk of foodborne illnesses, which has driven the development of new packaging technologies to meet the consumers’ requirements ... -
Reciclagem de ABS oriundo da indústria automobilística: influência do processamento por termoformagem e do envelhecimento nas propriedades mecânicas
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 20/04/2022)The growing demand for the recycling of materials for industrial use, arising from the social demand for sustainable practices, brings to the fore the need for more in-depth studies on structural changes to which these ... -
Reciclagem de borrachas: uma abordagem sobre processos e impactos ambientais
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/04/2022)Rubber wastes represent a growing and important environmental issue. Despite the existence of legislation, the increasing demand for rubber products, combined with their improper postconsumer disposal, have caused ... -
Reciclagem de embalagens multicamadas poliméricas
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 23/03/2023)The objective of this work is to present an overview of the main treatments of multilayer materials related to recycling, addressing two alternatives, both the separation of individual components, including delamination ... -
Redução nas emissões de CO2 em função de tecnologias aplicadas à fusão de vidros soda-cal-sílica
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 20/04/2022)At first, an overview of the problem will be presented of the carbon dioxide emissions and the global perspective concerning discussions, legislation, and emission reduction targets to be achieved. To understand the ... -
Reintegração da borracha de pneus inservíveis para construção civil
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 17/11/2021)The disposal of tires has been a major social challenge nowadays, which is why, many entities and companies that operate in this sector contribute to combating the incorrect dumping of tires. One of the methods most used ... -
Seleção de materiais poliméricos para blindagem de baterias de carros elétricos
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 25/08/2023)Electric vehicles (EVs) are an increasingly imminent reality, given the behind-thescenes efforts by major automakers to comply with new environmental regulations and enhance mobility efficiency. When considering an EV, ... -
Seleção e aplicação de um novo método de custeio e precificação para o CCDM/UFSCar
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/11/2021)This research aims to present a new costing and pricing method for CCDM, a laboratory that provides services in the area of materials engineering. A literature review was carried and papers, books and journals on the topic ... -
Simulação computacional aplicada ao estudo de juntas sn-bi-in/cu e sn-bi-zn/cu unidas por soldagem branda
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 17/11/2021)This work assessed the TCSLD3 database use for designing solder alloys of the Sn-Bi-In and Sn-Bi-Zn systems using the Thermo-Calc software and CALPHAD method. The thermodynamic analyses went through a preliminary detailing ... -
Síntese e avaliação de ligante geopolimérico “one-part” para aplicação em cerâmicas refratárias
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 27/10/2023)Refractory ceramics play a pivotal role in the development and operation of strategic industrial processes worldwide. Due to their high versatility and excellent performance in extreme service conditions, refractory concretes ... -
Structural characterization and mechanical properties of friction consolidated Al6CuXLi (X = 2, 4, and 6) alloys
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 21/03/2023)Friction Extrusion and Friction Consolidation are two similar solid-state processes, which can produce extrudes as wires, tubes, or in the case of consolidation, fully consolidated discs. The friction resulted from the ...